Williams Sound WIR TX8 Guía de instalación descargar pdf (Pagina 8)

TX10

Coverage area

with Single Emitter

Coverage area

with Second Emitter

Added to Same

Emission Point

(50% increase)

TX8

Multiple Emitters Installed to Maximize Coverage

FIG. 5a: Overlapping Illumination Patterms to Cover Larger Listening Areas

FIG. 5b: Using Two Emitters at Same Emission Point to Increase Coverage Area

Fig. 5a above is a typical example of how multiple emitters are used to cover larger listening areas.

Generally, it is desirable for the illumination patterns to overlap. Note: The coverage area will vary

depending on the infrared receiver being used; refer to Figures 2 and 4 to determine how many emitters

are required to achieve full coverage of a listening area.

When two emitters are used at the same emmission point in single channel mode, the overall coverage area

increases 50%. When using an RX3 receiver, as a result, the coverage area will increase to 15,000 ft

(1,393

); the RX7/8 will increase to 9,000 ft

(836 m

); and the RX4 will increase to 6,000 ft

(557 m

TX10 TX8

TX8 TX8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sin comentarios

Williams Sound WIR TX8 Guía de instalación Pagina 8