Williams Sound WIR TX8 Guía de instalación descargar pdf (Pagina 5)

TX8 EMITTER COVERAGE PATTERNS

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140

0 3 6 9 12 15 18 21 24 27 30 34 37 40 43

- 10

- 20

- 30

- 40

- 50

- 60

- 70

- 80

- 90

- 3

- 6

- 9

- 12

- 15

- 18

- 21

- 24

- 27

FIG 2: Receiver Coverage Area with TX8 or TX10 Emitter in Single Channel Mode

(FEET)

(METERS)

RX3 Receiver

1 Channel

(Approx. 10,000 sq. feet., 930 sq. meters)

RX4 Receiver

1 Channel

(Approx. 4,000 sq. feet., 370 sq. meters)

RX7/8 Receiver

1 Channel

(Approx. 6,000 sq. feet., 560 sq. meters)

The coverage area for the TX8 will vary depending on the receiver being used. Figures 2 and 4 demonstrate

the receiver coverage area when operating a single TX8 emitter in single channel mode. Generally, an RX3

receiver will operate up to 10,000 ft

(930 m

); a RX7/8 receiver will operate up to 6,000 ft

(560 m

); and a

RX4 receiver will operate up to 4,000 ft

(370 m

These patterns are the direct radiation pattern. The infrared radiation does not drop to zero outside the

illustrated patterns; it decreases. It still may be useable at a greater distance, depending on receiver sensitivity

and the reflective characteristics of the room.

Reflections of the infrared light from walls, ceilings, and floors may change these patterns.

Important: Remember to point the emitter towards the listening audience!

Remember: opaque objects block infrared light. Thus, the emitters cannot be concealed behind opaque walls,

curtains, etc. Neither should emitters be used in areas of extreme high or low temperatures, humidity, or

chemical environments.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comentarios a estos manuales

Sin comentarios

Williams Sound WIR TX8 Guía de instalación Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound WIR TX8