Williams Sound WIR TX8 Guía de instalación descargar pdf (Pagina 13)

CONTROLS AND FEATURES

OWER INPUT

Three-pin connector for TFP 010 power supply.

POWER INDICATOR LED (FRONT PANEL)

Located on the front panel in the top center of the LED window. Red indicator light glows when

power is on. (Note: The TX8 switches to low power mode when no baseband signal is present.)

BASEBAND INDICATOR LED (FRONT PANEL)

Located on the front panel in the bottom center of the LED window. Red indicator light glows

when baseband signal is present. (Note: The TX8 switches to low power mode when no baseband

signal is present.)

BASEBAND IN:

Connects to the Baseband Out jack of the TX10 Transmitter or another TX8 Emitter.

BASEBAND OUT:

Connects to the Baseband In jack of of the next TX8 Emitter in the chain when multiple emitters

are used.

WALL/CEILING MOUNT TEMPLATE:

A mounting bracket (BKT 024) is included with the Emitter. An optional tripod stand kit is also

available (SS-6, SS-10, or SS-11).

Power

Connection

Plug in TFP 010

Power Supply

Baseband (Modulation)

Out

Power On Baseband On

CNC

50 Ohms

Multi-Channel Infrared Transmitter

Helping People Hear

Made in U.S.A.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Power In:

24VAC

50-60Hz

30W

Williams Sound Corp., Minneapolis, Minnesota, USA

Power Supply Wiring:

Use NEC, Class 2 Wiring, 18 ga. minimum,

200 ft. (70m) maximum length (18 ga.)

Baseband Signal Wiring:

Use RG58 Coax,1000 ft. (350m) max. length

Note: It is normal for this unit to feel warm while it is in operation.

Plug

Williams Sound

Omnimount

25-STXMP

Baseband Out

BNC Connector,

50 Ω, 50 kHz–1 MHz

Baseband

Baseband In

BNC Connector,

50 Ω, 50 kHz–1 MHz

Baseband

Wall/Ceiling

Mount Template

Set of threaded holes

for use with the BKT 024

(Pana-Vise) bracket.

FIGURE 10: TX8 EMITTER REAR PANEL

Power LED

Indicates transmitter is on when lit.

Baseband LED

Indicates presence of baseband signal

FRONT

BACK

FIGURE 11: WIR TX8 BOTTOM PANEL

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Williams Sound WIR TX8 Guía de instalación Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound WIR TX8