Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación descargar pdf (Pagina 28)

Williams Sound

Helping People Hear

RX14 Headset Receiver

FRONT VIEW

TWO CHANNEL RECEIVER, MODEL WIR RX14-2

Step 1:

Step 2:

Step 3:

Step 4:

Turn the receiver’s Power Switch to ON

Place the headset on your head and adjust the headband size by pulling or pushing

on each earpiece.

Locate and adjust the individual volume controls for a comfortable listening level.

Choose between 2.3 MHz or 2.8 MHz operation by pressing the

frequency selector

button on the left earphone. NOTE: Be sure the infrared transmitter being used is

transmitting on 2.3 MHz or 2.8 MHz!

BATTERY INSTRUCTIONS

This receiver comes standard with disposable AAA Alkaline batteries (BAT 010). Rechargeable AAA

NiMH batteries (BAT 022) may also be used (not included).

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

The bottom of each battery compartment has a marked “arrow.” Apply pressure to

the arrow and pull the compartment open.

Remove depleted batteries.

To install new batteries, press them into place,

observing proper polarity

(+/-).

Close the battery compartment by inserting the cover top first (tabbed), then snap

the bottom into place.

When the sound becomes weak or distorted, replace or recharge batteries.

If using rechargeable batteries, charge batteries overnight prior to operating.

EXPECTED BATTERY LIFE

BAT 010 AAA Alkaline batteries 50 hours

BAT 022 AAA NiMH batteries 8 hours per charge

Batteries from other suppliers may provide different operating life.

INSTALLING AND REPLACING BATTERIES

Do not mix batteries and chargers from different suppliers.

FIG: 27a

FIG: 27b

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound SoundPlus Infrared System WIR SYS 90V