Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación descargar pdf (Pagina 19)

STD 004

Top of Tripod Tube

BKT 014

Bracket

Butteryfly

Screw

Grommet Screw

(Rubber Insert)

Williams Sound

Helping People Hear

MOUNTING THE TX9 EMITTER AND MOD 232 MODULATOR ON TO A TRIPOD

SS-6 Infrared Stand Kit

The SS-6 Infrared Stand Kit will hold a

single

TX9 Emitter and MOD 232 Modulator. The following diagrams

(Figures 19a, 19b, & 20) illustrates proper installation when using the SS-6 Infrared Stand Kit.

Figure 19a

Figure 19b

Instructions for Use and Care

1.) First, insert the grommet screw through the hole in the bottom of the BKT 014 bracket as

illustrated in Figure 19a above.

2.) Turn the butterfly screw clockwise (but do not tighten completely) so the grommet screw and

BKT 014 bracket are held into place.

3.) Carefully insert the grommet screw (with the attached BKT 014 bracket) into the top of the

tripod tube (STD 004) as illustrated in Figure 19a above. Be sure the BKT 014 bracket and the top of

the tripod tube are aligned flush as illustrated in Figure 19b.

4.) Lastly, tighten the butterfly screw so the BKT 014 bracket and the top of the tripod tube are held

firmly into place.

5.) The SS-6 is now assembled and ready for use.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Sin comentarios

Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación Pagina 19