Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación descargar pdf (Pagina 10)

Williams Sound

Helping People Hear

MIC/LINE INPUT

The MOD 232 only accepts line level balanced or unbalanced inputs on 1/4” TRS phone plug.

To setup the MOD 232 to accept line level inputs on the 3 pin XLR connector:

Instructions:

Place switch 2 in the “off” position.

To setup the MOD 232 to accept mic input on 3 pin XLR connector:

Instructions:

Place switch 2 in the “on” position.

MICROPHONE SIMPLEX POWER

Most condenser microphones require simplex power to operate. Power can be supplied

according to DIN 45596. (Selecting line-level input above will automatically disable simplex

power.) To

enable

simplex power on the MOD 232:

Instructions:

Place switch 3 in the “on” position.

disable

simplex power on the MOD 232:

Instructions:

Place switch 3 in the “off” position.

CHANNEL ENABLE

The factory setting of both channels are

. Note: When Mix Inputs mode is selected, the MOD

232 defaults to single channel operation, turning off Channel B.

To manually disable a channel:

Instructions:

Place switch 6 in the “on” position.

To manually enable a channel:

Instructions:

Place switch 6 in the “off” position.

MIX INPUTS (SINGLE CHANNEL OPERATION)

Mixing audio inputs places the MOD 232 in one-channel operation, turning off the carrier for

Channel B. Channel A & Channel B inputs are mixed and transmitted on Channel A.

To enable the MOD 232 to mix audio inputs:

Instructions:

Place switch 7 on

Channel A

in the “on” position

To disable the MOD 232 to mix audio inputs:

Instructions:

Place switch 7 on

Channel A

in the “off” position

2 CHANNEL/STEREO

stereo mode

, audio processing is coupled, providing a consistent stereo image, important

when listening with headphones. Compression for both channels is adjusted with the CH A

compression control. The left channel audio source should feed Input CH A and the right

channel audio source should feed Input Channel B.

2 Channel mode

provides mono processed

audio. Each channel operates independently and transmits two mono signals.

To set the MOD 232 in stereo mode:

Instructions:

Place switch 7 on

Channel B

in the “on” position

To set the MOD 232 in 2 Channel mode:

Instructions:

Place switch 7 on

Channel B

in the “off” position

NOTE: In stereo mode, Channel A compression setting controls both channels.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comentarios a estos manuales

Sin comentarios

Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound SoundPlus Infrared System WIR SYS 90V