Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación descargar pdf (Pagina 16)

Williams Sound

Helping People Hear

TX9 TX9

TX9

Coverage Area

with Single Emitter

Coverage Area

with Second Emitter

Added to Same

Emission Point

(50% increase)

TX9

FIG. 15a: Overlapping Illumination Patterns to Cover Larger Listening Areas

Multiple Emitters Installed to Maximize Coverage

FIG. 15b: Overlapping Illumination Patterns to Cover Larger Listening Areas

Fig. 15a above is a typical example of how multiple emitters are used to cover larger listening

areas. Generally it is desirable for the illumination patterns to overlap. Note: The coverage area will

vary depending on the infrared receiver being used; refer to Figures 11 and 14 to determine how

many emitters are required to achieve full coverage of a listening area.

When two emitters are used at the same emission point in

single channel mode,

the overall

coverage area increses 50%. When using an RX12-4 receiver, as a result, the coverage area will

increase to an estimated 42,000 ft

(3,902 m

); the RX14-2 will increase to 5,250 ft

(488 m

); the RX16

will increase to 4,590 ft

(426 m

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sin comentarios

Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación Pagina 16