Williams Sound MOD 112 Guía de instalación descargar pdf (Pagina 19)

Williams Sound Corp.

10321 West 70th St., Eden Prairie, MN 55344-3446

U.S.A. 800-843-3544 / 952-943-2252 / FAX: 952-943-2174

Infrared Emitter, Model TX6

Dimensions, Weight: 11.125" (28.3 cm) W x 8.125" (20.6 cm) H x 3.25" (8.3 cm) D, 3.25 lbs. (1.6 kg)

Color: Black epoxy paint with white legends, red acrylic window

Wall Mount: Omnidirectional mount included for wall and ceiling mounting.

Tripod Mount: Optional SS-2 Tripod Stand Kit available

Power: External power supply, 24 VAC, 50 or 60 Hz, 50 VA, 0.9 A nom. current drain

Transmitter shuts off when baseband signal is not present

Operating Req.: 0-50° C ambient temperature, non-condensing, non-corrosive atmosphere

Coverage Area: Single-channel mode: 10,000 sq. ft. (930 sq. m); Two-channel mode: 5,000 sq. ft. (465 sq.

50° cone pattern, see coverage diagram

ont Panel:

Power Indicator: Red LED, visible in lower front of window

Baseband Indicator: Red LED, visible in upper part of window

Rear Panel:

Mounting Holes: One set of threaded holes for use with omnidirectional mount (included)

Two threaded holes on sides of the cabinet for Tripod Stand Kit

Baseband Input: BNC connector, 50 Ω, 50 kHz to 1 MHz carriers, 100 mV nominal per carrier,

10 V RMS maximum aggregate baseband amplitude

Baseband Output: BNC connector, 50 Ω, 50 kHz to 1 MHz baseband

Power Connection: 3-pin molex

Baseband Cable: RG-58 Coax, BNC-connectors

Power Cable: NEC Class 2 wiring, 2-conductor, 18 ga.; 200 foot (61 m) max. length (for 18 ga. wire)

Wire Gauge Options: 22 ga.: 0–10'; 20 ga.: 0–75'; 18 ga.: 0–200'

Each TX6 Transmitter requires its own 24 VAC Power Supply

Two–Channel Infrared Receiver, Model WIR RX5

Size and Weight: 3-5/8" L x 2-3/8" W x 7/8" H (9.2 cm x 6 cm x 2.2 cm)

Color and Material: Gray, shatter-proof polypropylene

Battery Type: 1.5 V (AA) x 2, Alkaline (BAT 001) or Rechargeable AA Ni-Cad (BAT 026)

Battery Life: 30 hours with BAT 001, 15 hours/charge with BAT 026, 25 mA, nom. current drain

Modulation Frequencies: 95 kHz FM, 50 µS de-emphasis OR 250 kHz FM, 50 µS de-emphasis

Signal to Noise Ratio:

60 dB with WIR TX6

Controls: Combination volume/On-Off knob, Push–button channel selector, Slide switch tone con-

trol

Audio Output: 3.5 mm mono mini phone jack, maximum into 16 Ω

Acoustic Output: 130 dB MAX SSPL90 with EAR 013

The RX5 Two-Channel Infrared Receiver can be used with a Neckloop TeleCoil Coupler

(NKL 001) to magnetically couple into a hearing aid that has a telephone pick-up coil.

Stereo Infrared Receiver, Model WIR RX6

Size and Weight: 3-5/8" L x 2-3/8" W x 7/8" H (9.2 cm x 6 cm x 2.2 cm)

Color and Material: Gray, shatter-proof polypropylene

Battery Type: 1.5V (AA) x 2, Alkaline (BAT 001) or Rechargeable AA Ni-Cad (BAT 026)

Battery Life: 30 hours with BAT 001, 15 hours/charge with BAT 026, 25 mA, nom. current drain

Modulation Frequencies:

95 kHz FM, 50

S de-emphasis AND 250 kHz FM, 50

S de-emphasis

Signal to Noise Ratio: 60 dB with WIR TX6

Controls: Combination volume/On-Off knob, Slide switch tone control

Audio Output: 3.5 mm stereo mini phone jack, maximum into 16 Ω

1 2 ... 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios

Williams Sound MOD 112 Guía de instalación Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound MOD 112