Williams Sound MOD 112 Guía de instalación descargar pdf (Pagina 14)

Williams Sound

Helping People Hear



Baseband Output

Carrier tones of 95 kHz and 250 kHz are provided at

this BNC connector. One 50 Ω device may be con-

nected here using RG-58 cable. Additional devices

may be connected by “looping through” the connect-

ed device or by means of a suitable distribution

amplifier. The output impedance is 50 Ω.

Frequency accuracy is approximately ± .005%.

Deviation is ± 50 kHz, maximum. Average devia-

tion is dependent on program material and whether

Limit mode or Compress mode is selected.

Baseband Input

An additional modulator may be connected here to

allow combining carriers for channels in addition to

95 kHz and 250 kHz. The input impedance is 50 Ω.

Power In

21 VAC to 26 VAC only, 50 or 60 Hz. (TFP 016

Power Supply) Current consumption is approximate

ly 300 mA.

TX6 Transmitter

Power Input

Three-pin connector for TFP 010 power supply.

Power Indicator LED (front panel)

Located on the front panel in the top center of the

LED window. Red indicator light glows when power

is on.

Note: The TX6 shuts off when no baseband signal

is present.

Baseband Indicator LED (front panel)

Located on the front panel in the bottom center of

the LED window

. Red indicator light glows when

baseband signal is present.

Baseband In:

Connects to the Baseband Out jack of the MOD 112

modulator or another TX6 transmitter.

Baseband Out:

Connects to the Baseband In jack of of the next TX6

transmitter in the chain when multiple transmitters

are used.

SB-3 Wall/Ceiling Mount

Template:

An omnidirectional mounting

bracket is included with the

Transmitter. An optional tripod

stand kit is also available (WSC

Part #SS-2).

Baseband In

Baseband Out

0 Ohms

50 Ohms

Power In

24VAC

50-60Hz

30W

Omnimount

25-STXMP

Made in U.S.A.Williams Sound Corp., Minneapolis, Minnesota, USA

Power Supply Wiring:

Use NEC, Class 2 Wiring,

18 ga. Min

200 ft. Max. Length (18 ga.)

Baseband Signal Wiring:

Use RG58 Coax,

1000 ft. Max. Length

Note: It is normal for this unit

to feel warm while it is in

operation.

CAUTION

ISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Multi-Channel

Infrared Transmitter

Model WIR TX6

Williams Sound

Helping People Hear

Figure 10: TX6 Transmitter Rear Panel

Power In

Three-pin Molex connector

for TFP 010 power supply

SB-3 W

all/Ceiling Mount T

emplate

Set of threaded holes for use with omnidirection

al mount.

Baseband In

BNC Connector, 50 Ω,

50 kHz–1 MHz Baseband

Baseband Out

BNC Connector, 50 Ω,

50 kHz–1 MHz Baseband

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios

Williams Sound MOD 112 Guía de instalación Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound MOD 112