Williams Sound MOD 112 Guía de instalación descargar pdf (Pagina 15)

Williams Sound

Helping People Hear



Receiver Instructions

Two Channel IR Receiver Model WIR RX5

Make sure the “eye” on the front of the receiver is

not covered up when in use. The receiver is intend-

ed to be worn on the front of the body, hanging from

the lanyard attached to the receiver. The receiver

will not work if it is placed in a pocket or purse. A

variety of earphones, headphones, or a neckloop

telecoil coupler can be used with the RX5 Receiver.

Step 1: To install the batteries, open the battery

compartment using a coin in the slot in the

bottom of the receiver. Press two AA bat-

teries into place, observing proper battery

polarity.

Step 2: Plug the earphone or headphone into the

earphone jack.

Step 3: Turn the receiver on by rotating the vol-

ume control knob clockwise.

Step 4:

Choose the appropriate channel using the

push-button channel selector.

Step 5:

Adjust the tone to your preference using

the slide switch tone control. To avoid

draining the battery

, make sure the receiv-

er is turned off when not in use.

Stereo IR Receiver Model WIR RX6

Make sure the“eye” on the front of the receiver is

not covered up when in use. The receiver is intend-

ed to be worn on the front of the body, hanging from

the lanyard attached to the receiver. The receiver

will not work if it is placed in a pocket or purse.

variety of stereo earphones and headphones can

be used with the RX6 Receiver.

Step 1:

o install the batteries, open the battery

compartment using a coin in the slot in the

bottom of the receiver. Press two AA bat-

teries into place, observing proper battery

polarity.

Step 2: Plug the earphone or headphone into the

earphone jack.

Step 3: Turn the receiver on by rotating the vol-

ume control knob clockwise.

Step 4: Adjust the tone to your preference using

the slide switch tone control. To avoid

draining the battery, make sure the receiv-

er is turned off when not in use.

Battery Information for Receivers

For RX5 and RX6 Receivers in normal use, a AA

alkaline battery (BAT 001) will last about 30 hours.

Rechargeable AA batteries will last about 15 hours

per charge.

In the case of rechargeable batteries, most commer-

cially available external charger kits will work well.

If the sound becomes weak or distorted, replace the

batteries. The indicator light may still be on, even

with weak batteries. Do not leave dead batteries in

the receivers, they may leak and damage the receiv-

er.

DO NOT attempt to recharge disposable batter-

ies!

AVOID shor

ting plus and minus battery termi-

nals together with metal objects. Battery damage

and burns can result.

DO NOT mix rechargeable batteries and charg-

ers from different manufacturers.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios

Williams Sound MOD 112 Guía de instalación Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound MOD 112