Williams Sound WIR RX6 Guía de instalación descargar pdf (Pagina 23)

Williams Sound

Helping People Hear

SoundPlus

WIR TX800 Infrared System Specifications

TWO–CHANNEL INFRARED MODULATOR, MODEL MOD 112

Dimensions, Weight: 8.45" (21.5 cm) W x 8.18" (20.8 cm) D x 1.72" (4.4 cm) H, 3 lbs. (1.4 kg)

Color: Black epoxy paint with white legends

Rack Mount: One IEC rack space high, one or two units can be mounted in a single rack space with

optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits

Power: External power supply, 24 VAC, 50 or 60 Hz, 10 VA maximum

Baseband Output: 50 Ω source impedance

Carriers: 100 mV per carrier

Channel 1: 95 kHz ± 50 kHz deviation, 50 µsec pre-emphasis

Channel 2: 250 kHz ± 50 kHz deviation, 50 µsec pre-emphasis

AGC: Variable slope compressor or soft limiter, switch selected

Carrier Timers: One 30 minute (approx.) timer per channel. Turns off carrier if channel is silent

(lowest light on bar graph does not light) for approximately 30 minutes.

Operating Requirements: 0-50°C ambient temperature, non-condensing, non-corrosive atmosphere

RONT PANEL:

Power Switch: Two-position rocker, ON/OFF

Power Indicator: Green LED

Audio Level Controls: 1 rotary control per channel

Audio Indicators: One (1) 10 LED bar graph per channel

Carrier (CXR) LEDs: 1 green carrier “on” indicator LED per channel

Limit/Compress Switch: Selects variable slope compression or soft limiting

Stereo/Discrete Switch: Selects stereo (coupled processing and timers, stereo monitoring) or

discrete (Independent processing and timers, mono monitoring)

Phones Switch: Selects CH 1 or CH 2 for phones when mode is in discrete position

Phones Output: 1/4" stereo phones jack. Produces stereo or mono output depending on modulation

mode selected. Accepts stereo, mono, and any impedance phones.

Infrared Test LED: IR LED for receiver testing, monitoring, and audio signal testing.

EAR PANEL:

Mic Input: Combination jack, 3 pin XLR, balanced, lo-Z, 100 µV min. to 90 mV max. 1m V nominal, 3

kΩ input impedance. Supplies simplex power 20 V (DIN45596) for condenser mics

Line Input: Combination jack, 1/4” TRS jack. 21 mV min. to 10 V max., 212 mV nominal,

100 KΩ input impedance. Accepts unbalanced or balanced line level inputs

Baseband Output: (1) BNC connector, 50Ω, 100 mV RMS per carrier, use RG-58 cable

Baseband Loopthru Input: (1) BNC connector, 50Ω

Power Connections: 3-pin molex

Emitter Type: For use with Williams Sound Infrared Emitters. For multi-emitter systems,

each emitter repeats the baseband signal to drive the next emitter in the chain.

Accessory Connector: 9-pin, Sub–D female, various circuit connections

(See diagram on top panel and in manual for details)

MULTI-CHANNEL INFRARED EMITTER, MODEL TX8

Dimensions, Weight: 11.25" W x 6.25" H x 2.125" D (28.6 cm x 15.9 cm x 5.4 cm) 1.9 lbs. (0.9 kg)

Color: Black epoxy paint with white legends, red acrylic window

Wall Mount: BKT 024 mounting bracket included for wall and ceiling mounting.

Tripod Mount: Optional SS-6 Tripod Stand Kit available

Power: External power supply, 24 VAC, 50 or 60 Hz, 50 VA, 0.9 A nom. current drain

Emitter shuts off when baseband signal is not present

Operating Req.: 0-50° C ambient temperature, non-condensing, non-corrosive atmosphere

Coverage Area: Two-Channel mode: 3,760 sq. ft. (350 sq. m) Single-Channel mode: 10,000 sq. ft. (930 sq. m)

50° cone pattern, see coverage diagrams

Infrared Type: Class 1 LED Product

RONT PANEL:

Power Indicator: Red LED, visible from bottom through vent holes, lower right

Baseband Indicator: Red LED, visible from bottom through vent holes, lower left

1 2 ... 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Williams Sound WIR RX6 Guía de instalación Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound WIR RX6