Williams Sound WIR RX6 Guía de instalación descargar pdf (Pagina 18)

Williams Sound

Helping People Hear

ASEBAND INDICATOR

LED

Visible through the left side of the bottom panel. Red indicator light glows when power is on.

BASEBAND

Connects to the Baseband Out jack of the MOD 112 modulator or another TX8 emitter.

BASEBAND OUT:

Connects to the Baseband In jack of of the next TX8 emitter in the chain when multiple

emitters are used.

WALL/CEILING MOUNT TEMPLATE:

A mounting bracket (BKT 024) is included with the emitter. An optional tripod stand kit is

also available (WSC Part #SS-6, SS-10).

Note: The WIR TX8 Infrared Emitter is a Class 1 LED product.

Power

Connection

Plug in TFP 010

Power Supply

Baseband (Modulation)

Out

Power On Baseband On

CNC

50 Ohms

Multi-Channel Infrared Transmitter

Helping People Hear

Made in U.S.A.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Power In:

24VAC

50-60Hz

30W

Williams Sound Corp., Minneapolis, Minnesota, USA

Power Supply Wiring:

Use NEC, Class 2 Wiring, 18 ga. minimum,

200 ft. (61 m) maximum length (18 ga.)

Baseband Signal Wiring:

Use RG58 Coax,1000 ft. (305 m) max. length

Note: It is normal for this unit to feel warm while it is in operation.

Plug

Williams Sound

Mounting

Template

Baseband Out

BNC Connector,

50 Ω, 50 kHz–1 MHz

Baseband

Baseband In

BNC Connector,

50 Ω, 50 kHz–1 MHz

Baseband

Wall/Ceiling

Mount Template

Set of threaded holes

for use with the BKT 024

(Pana-Vise) bracket.

FIGURE 12: TX8 EMITTER REAR PANEL

Power LED

Indicates transmitter is on when lit.

Baseband LED

Indicates presence of baseband signal

FRONT

BACK

FIGURE 13: WIR TX8 BOTTOM PANEL

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Williams Sound WIR RX6 Guía de instalación Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound WIR RX6