Williams Sound MOD 112 Guía de instalación descargar pdf (Pagina 24)

FRONT PANEL:

Power Indicator: Red LED, visible from bottom through vent holes, lower right

Baseband Indicator: Red LED, visible from bottom through vent holes, lower left

EAR PANEL:

Mounting Holes: One set of threaded holes for use with the BKT 024 mounting bracket (included)

Two threaded holes on sides of the cabinet for Tripod Stand Kit

Baseband Input: BNC connector, 50 Ω, 50 kHz to 500 kHz carriers, 100 mV nominal per carrier,

10 V RMS maximum aggregate baseband amplitude

Baseband Output: BNC connector, 50 Ω, 50 kHz to kHz baseband

Baseband Cable: RG-58 Coax, BNC-connectors

Power: External power supply, 3-pin molex connector, 24 VAC, 50 or 60 Hz, 30 VA, 0.9 A nom.

current drain

Power Cable: NEC Class 2 wiring, 2-conductor, 18 ga.; 200 foot (61 m) max. length for 18 gauge wire

(See table below for minimum gauge requirements at other lengths)

Each TX8 Transmitter requires its own 24 VAC Power Supply

Cable Length Required Minimum Wire Gauge

0 – 10 feet (3 m) 22 gauge

0 – 75 feet (23 m) 20 gauge

0 – 200 feet (61 m) 18 gauge

0 – 500 feet (152 m) 16 gauge

0 – 1,000 feet (305 m) 14 gauge

INFRARED

RECEIVER, MODEL WIR RX7

Size and Weight: 3-5/8" L x 2-3/8" W x 7/8" H (9.2 cm x 6 cm x 2.4 cm) 4.48 oz. (127 g)

Color and Material: Neptune Blue, shatter-proof polypropylene

Battery Type: 1.5V (AA) x 2, Alkaline (BAT 001) or Rechargeable AA NiMH (BAT 026)

Battery Life: 30 hours with BAT 001, 15 hours/charge with BAT 026, 25 mA, nom. current drain

Modulation Frequency: 250 kHz FM, 50 µS de-emphasis

Signal to Noise Ratio: 60 dB with WIR TX8 and MOD 111

Controls: Combination volume/On-Off knob,

Switched Low-Cut tone control (Lo: 20 Hz / Mid: 120 Hz / Hi: 700 Hz)

Audio Output: 3.5 mm mono mini phone jack, 35 mW maximum into 16 Ω

Acoustic Output: 130 dB MAX SSPL90 with EAR 013

Note: The RX7/RX8 Infrared Receivers can be used with a Neckloop TeleCoil Coupler

(NKL 001) to magnetically couple into a hearing aid that has a telephone pick-up coil.

Add’l Compatible Receivers: WIR RX8: Single Channel Infrared Receiver, operates at 95 kHz

WIR RX5: Selectable Channel Infrared Receiver, operates at either 95 kHz or 250 kHz

ACCESSORIES

CHG 200 Multi-Charger This charger is designed to store and charge one or two receivers simultaneously

overnight. 110 VAC

SS-6 Tripod Stand Kit Includes adjustable tripod stand, adaptor, mounting bracket, and hardware. Mounts

modulator and emitter together or separately.

RPK 005/RPK 006 Rack Panel Kits The RPK 005 mounts one modulator in one EIA rack space, the RPK 006 mounts two.

Includes all necessary hardware and easy-to-follow instructions.

Williams Sound Corp.

10399 West 70th St., Eden Prairie, MN 55344-3459

U.S.A. 800-328-6190 / 952-943-2252 / FAX: 952-943-2174

www.williamssound.com

1 2 ... 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Williams Sound MOD 112 Guía de instalación Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound MOD 112