Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación descargar pdf (Pagina 7)

SoundPlus

Infrared Listening System

MAN 132H

Conguration Settings

Figure 8 illustrates how to congure your system using the DIP switches (Figure 7) located on the back of the MOD

232 Modulator. This diagram is also printed on top of the MOD 232 Modulator unit for quick reference.

A250

CHANNEL A AND B

CONFIGUREATION

SWITCHES

A252

Figure 8: DIP Switch Conguration Chart

IMPORTANT: Channel A and Channel B must be set to different frequencies!

Compressor Gain

The MOD 232’s Compressor Gain is set in “Moderate” mode from the factory. Use this setting for simultaneous

interpretation. Be sure that the compress control, located on the front of the MOD 232 (Figure 6, page 6), is turned

fully counter-clockwise. Compression can be added if desired by turning the compress control clockwise.

For hearing assistance applications, the MOD 232’s Compressor Gain can be set to “Maximum” mode. For additional

compression, use a tuning wand (PLT 005) or small screw driver and gently turn the compress control (Figure 6, page

6) on the front of the MOD 232 clockwise.

Figure 7: Conguration Switches

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sin comentarios

Williams Sound SoundPlus Infrared System WIR SYS 90V Guía de instalación Pagina 7