Williams Sound MOD 112 Manual de usuario descargar pdf (Pagina 2)

Sound Plus

™

Basic Courtroom System, Model WIR SYS 1

Configuration

Switches

Input CH A Input CH B

Audio Line

Output

CH A

CH B

50 Ohms

100 Ohms

Made in USA

24V

24 VAC, 15 VA, 50-60 Hz

Power In

Baseband

Input Output Output

MOD 232 Infrared System Modulator

Plug

Williams Sound

12345678

Fig. 2: MOD 232 Rear Panel

Dimensions, Weight: 11.25" W x 6.25" H x 2.125" D (28.6 cm x 15.9 cm x 5.4 cm), 1.9 lbs (0.9 kg)

Color: Black with white legends, red acrylic lens

Power Supply: Wall Transformer, 24 VAC, 50-60 Hz, 35 VA, 3-pin MOLEX Connector

North America: TFP 010, UL/CSA

Europe: TFP 027-01, 2-pin Schuko plug, CE

UK: TFP 027-02, 3-pin UK plug, CE

Note: Each WIR TX9 requires its own power supply

Power Cable: NEC Class 2 wiring, two-conductor, 18 ga., 200’ (61m) max. length

Indicators: Green LED power indicator, red LED baseband indicator

Carrier Frequency: 50 kHz to 8 MHz

Emitter IR Power: 3.5 watts

Coverage Area: 28,000 ft

(2,600 m

) in single-channel mode when using the RX12-4 Receiver

11,000 ft

(1,000 m

) in four-channel mode when using the RX12-4 Receiver

3,500 ft

(325 m

) in single-channel mode when using the RX14-2 Receiver

3,063 ft

(285 m

) in single-channel mode when using the RX16 Receiver

(See coverage area diagrams)

Baseband Input: BNC, 100 mV per carrier, 50Ω, for use with WIR TX9 or MOD 232 only

Baseband Output: BNC, 50 Ω, for use with TX9 only

Baseband Cable: RG 58 Coax, BNC connectors, maximum 1000’ (300m) length

Operating Requirements: 0-50º C ambient temperature, non-condensing, non-corrosive atmosphere

Mounting Kits: Wall or Ceiling Mount: BKT 024 Omnidirectional mount, Mic Stand Kit: SS-11 or SS-6

Warranty: 5 years on emitter, 90 days on accessories

Approvals: CE, FCC, RoHS, WEEE

Compatible Receivers: WIR RX12-4 Four-Channel Receiver, RX14 Stereo Receiver, RX16 Two-Channel Receiver

WIR TX9 Emitter:

Power On Baseband On

Multi-Channel Infrared Transmitter

Made in U.S.A.

24 VACNC

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Power In:

24VAC

50-60Hz

35VA

Power Supply Wiring:

Baseband Signal Wiring:

Note: It is normal for this unit to feel warm while it is in operation.

Plug

Use NEC, Class 2 Wiring, 18 ga. minimum,

200 ft. (70m) maximum length (18 ga.)

Use 50 Ohm Coaxial Cable (RG58)

Use RG58 Coax,1000 ft. (350m) max. length

www.williamssound.com

InOut Out

50 Ohms

Baseband

(Modulation)

Mounting

Bracket

RoHS

Class 1

LED Product

Williams Sound Corp., Minneapolis, Minnesota, USA

Patent Pending

Fig. 3: WIR TX9 Rear Panel

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

Power Input: 3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA

Audio Input Jack: CHA and CHB combination XLR/TRS jack

Mic Level: Balanced, Lo-Z, 100 µV min. to 90 mV max., 1mV nominal, 3 kΩ input impedance, supplies switchable simplex power

per DIN 45596 for condenser mics

Line Level: Balanced or unbalanced, 21 mV min. to 10V max., 212 mV nominal, 100 kΩ

Audio Line Output Jacks: RCA Jack, CHA and CHB, 500 mV, unbalanced, 100 Ω source impedance, load impedance must be greater than 1 kΩ

Configuration Switches: CHA and CHB 8-position DIP switch, selects Mic/Line input, compressor gain, simplex power, discrete or mixed

inputs, carrier frequency, channel disable, auto shut-off timer

Baseband Input Jack: BNC, allows mixing with additional MOD 232 Modulator (4CH operation), 100 mV, 50 Ω input impedance, use with MOD

232 or MOD 112 (111), BNC, RG-58 Cable

Baseband Output Jack: Two BNC jacks carry baseband signal, 100 mV/channel, 50Ω source impedance, for use with WIR TX9 or MOD 232 only

Approvals: CE, FCC

Operating Requirements: 0-50º C ambient temperature, non-condensing, non-corrosive atmosphere

Warranty: 5 years on modulator, 90 days on accessories

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Williams Sound MOD 112 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Williams Sound MOD 112